home *** CD-ROM | disk | FTP | other *** search
/ Software Vault: The Gold Collection / Software Vault - The Gold Collection (American Databankers) (1993).ISO / cdr28 / blts992.zip / GPIBRIDG.TXT < prev    next >
Text File  |  1993-03-01  |  2KB  |  49 lines

  1. LANtastic Network Operating System Version 4 Compatibility Bulletin
  2. Product Reviewed:  GPIBridge, by PC Support
  3. Classification: Miscellaneous (Bridging software)
  4. Date:  7/31/92
  5. Engineer:  JAG
  6. --------------------------------------------------------------------------------
  7.     
  8. Compatibility Statement:
  9. GPIBridge by PC Support is compatible with LANtastic 4.xx.
  10.  
  11. Product Overview:
  12. GPIBridge is a software solution that allows you to control GPIB (General 
  13. Purpose Interface Bus, or IEEE 488) instruments remotely and to share the 
  14. equipment among multiple users.  One dedicated PC with a National Instruments 
  15. IEEE 488 interface adapter becomes the "GPIB controller" and the workstations 
  16. communicate with it via LANtastic.  This allows you to remotely run PC based 
  17. applications designed for the National Instruments card.
  18.  
  19. Product Installation Notes:
  20. Following the recommendations in the GPIBridge documentation, install the 
  21. National Instruments adapter and software in the PC that will be the GPIB 
  22. controller and verify that GPIB communication is working correctly.  Then 
  23. install the LANtastic hardware and software and ensure that it is functioning 
  24. properly.  Finally, install the GPIBridge software on both the workstations and 
  25. the GPIB controller PC.  See the GPIBridge and National Instruments manuals for 
  26. further details and troubleshooting tips.
  27.  
  28. Product Execution Notes:
  29. The GCONTROL program runs on the PC that contains the IEEE 488 adapter.  
  30. GCONTROL runs in the foreground, so the PC cannot be used as a LANtastic or 
  31. GPIB workstation.  It can, however, be used as a LANtastic server at the same 
  32. time, since server functions are executed in the background.  At the 
  33. workstations the GPIBridge device driver, installed in CONFIG.SYS, redirects all
  34. GPIB commands to the controller PC, which in turn sends the commands to the 
  35. correct GPIB-connected instrument.  See the GPIBridge manual for full 
  36. instructions.
  37.  
  38. Vendor Information:
  39. PC Support
  40. 284 Bangor Ave.
  41. San Jose, CA 95123
  42. 408/226-6898
  43.  
  44. --------------------------------------------------------------------------------
  45. ARTISOFT, Inc. makes no warranties as to the completeness or accuracy of this 
  46. document.  LANtastic is a trademark of ARTISOFT, Inc.  Brand names, company 
  47. names, and product names are trademarks or registered trademarks of their 
  48. respective companies.
  49.